ZeeQ will be soon on all DTHs
ZeeQ, the new kids' genre channel offering by Zee Entertainment
Enterprises Ltd. is now available on Dish TV – the DTH service division
of Zee Network Enterprises (Essel Group Venture) and on Videocon d2h –
the subsidiary of Videocon Group.
Dish TV customers can watch the 24-hour channel, ZeeQ on channel no.
510, whereas Videocon d2h customers can watch it on channel no. 525, as a
paid-for channel. ZeeQ’s edutainment platform is set to foster
curiosity among children through fun and entertainment.
The ZQ programming slate features programmes like'Teenovation', a show
in association with National Innovation Foundation about Children
innovators who display brilliance and create utility items for problems
they see around them,'Wordmatch'a national Hindi game show,'BrainCafé' a
perfect hang out to learn about science theories, concepts and its
applications and many more.
The Business Head of ZeeQ, Subhdarshi Tripathy said,"ZeeQ has researched
programming content which is produced on the basis of experience of
Indian kids."He added,"We are committed to provide the unique viewing
experience of learning through ZeeQ’s edutainment platform to Indian
kids through wider network of Dish TV and Videocon d2h."
In next couple of months, ZeeQ has plans to extend its presence on other
DTH platforms too.
Regards
Ramki
Wednesday, 21 November 2012
What is KU Band ?
The Ku band ("kay-yoo" kurz-under band) is a portion of the
electromagnetic spectrum in the microwave range of frequencies ranging
from 12 to 18 GHz.
Ku band is primarily used for satellite communications, particularly for
satellite backhauls from remote locations back to a television
network's studio for editing and broadcasting.
Ku band is split into multiple segments that vary by geographical region
by the International Telecommunication Union (ITU). Several highly used
segments in the Americas (ITU Region 2) are:
The 11.7 to 12.2 GHz band is allocated to the FSS (fixed service
satellite, uplink 14.0 to 14.5 GHz). There are more than 22 FSS Ku-band
satellites orbiting over North America, each carrying 12 to 24
transponders, 20 to 120 watts per transponder, and requiring a 0.8-m to
1.5-m antenna for clear reception.
The 12.2 to 12.7 GHz segment is allocated to the BSS (broadcasting
satellite service). BSS/DBS direct broadcast satellites normally carry
16 to 32 transponders of 27 MHz bandwidth running at 100 to 240 watts of
power, allowing the use of receiver antennas as small as 18 inches (450
mm).
Ku-band signals can be affected by rain attenuation (rain fade).
NBC was the first television network to uplink a majority of its
affiliate feeds via Ku band in 1983.
KU signals have a 5 digit Frequency (eg. 12052 )
Standard KU LNB's use an L.O. of 10750
Universal KU LNB's use an L.O. of 9750-10600
DBS LNB's use an L.O. of 11250
Windows 8 Minimum System Requirements
To run Windows 8, Microsoft recommends using a computer that has at least:
1 GHz or faster processor
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
16 GB available hard disk space (32-bit) or 20 GB (64-bit)
DirectX 9 graphics device with WDDM 10 or higher driver This is the minimum required for Windows 8 to run, and there are some few caveats you need to be aware of: Windows 8 have a minimum 1024 × 768 screen resolution. If you attempt to run the new Windows 8 apps with less than this resolution (e.g. 1024 × 600, 800 × 600,)you’ll receive an error message. Using the 32-bit version of Windows 8 on a system with 1 GB of RAM will work. For a fast experience, using at least 2 GB of RAM is recommended Using Windows 8 on a single-core processor running at 1 GHz is possible but won’t be a great experience. Using at least a dual-core processor running at 1 GHz is recommended.
DirectX 9 graphics device with WDDM 10 or higher driver This is the minimum required for Windows 8 to run, and there are some few caveats you need to be aware of: Windows 8 have a minimum 1024 × 768 screen resolution. If you attempt to run the new Windows 8 apps with less than this resolution (e.g. 1024 × 600, 800 × 600,)you’ll receive an error message. Using the 32-bit version of Windows 8 on a system with 1 GB of RAM will work. For a fast experience, using at least 2 GB of RAM is recommended Using Windows 8 on a single-core processor running at 1 GHz is possible but won’t be a great experience. Using at least a dual-core processor running at 1 GHz is recommended.
how to convert u r blogspot.com website into .com website
how to convert u r blogspot.com website into .com website ..answer is
very simple u need one domain and 1 hosting just connect that domain to u
r blogspot website ..if u dont know how to do it then just send Email
to :: Ramkicompany@gmail.com we will help u :::
We also provide website development, website designing, Customized
Software domain name booking, web hosting, logo design,website makeing
,converting u r blogspot.com website into .com and all kind of web and
software solution at very affordable rates.
Regard's
Ramki website building company
website :: www.RPBROTHERS.in
Email :: Ramkicompany@gmail.com
Ramki website building company new AD
Hello sir do u want u r own website to increase u r Business
We provide website development, website designing, Customized Software
domain name booking, web hosting, logo design,website makeing and all
kind of web and software solution at very affordable rates.
Regard's
Ramki website building company
website :: www.RPBROTHERS.in
Email :: Ramkicompany@gmail.com
Nokia Mobile Phone HACK Codes
1. Imagine ur cell battery is very low, u r expecting an important call
and u don’t have a charger.
Nokia instrument comes with a reserve battery. To activate, key is
“*3370#”
Ur cell will restart with this reserve and ur instrument will show a
50% increase in battery.
This reserve will get charged when u charge ur cell next time.
*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the
best sound quality but talk time is reduced by approx 5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)
*#4720# Activate Half Rate Codec – Your phone uses a lower quality
sound but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec
2. *#0000# Displays your phones software version,
1st Line : Software Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
3. *#9999# Phones software version if *#0000# does not work.
4. *#06# For checking the International Mobile Equipment Identity (IMEI
Number).
5. #pw+1234567890+1# Provider Lock Status. (use the “*” button to
obtain the “p,w” and “+” symbols).
6. #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain
the “p,w” and “+” symbols).
7. #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain
the “p,w” and “+” symbols).
8. #pw+1234567890+4# SIM Card Lock Status.(use the “*” button to obtain
the “p,w” and “+” symbols).
9. *#147# (vodafone) this lets you know who called you last *#1471#
Last call (Only vodofone).
10. *#21# Allows you to check the number that “All Calls” are diverted
to.
11. *#2640# Displays security code in use.
12. *#30# Lets you see the private number.
13. *#43# Allows you to check the “Call Waiting” status of your phone.
14. *#61# Allows you to check the number that “On No Reply” calls are
diverted to.
15. *#62# Allows you to check the number that “Divert If Unreachable(no
service)” calls are diverted to.
16. *#67# Allows you to check the number that “On Busy Calls” are
diverted to.
17. *#67705646# removes operator logo on 3310 & 3330
18. *#73# Reset phone timers and game scores
19. *#746025625# Displays the SIM Clock status, if your phone supports
this power saving feature “SIM Clock Stop Allowed”, it means you will
get the best standby time possible
20. *#7760# Manufactures code
21. *#7780# Restore factory settings
22. *#8110# Software version for the nokia 8110
23. *#92702689# (to remember *#WARRANTY#)
Displays -
1. Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again
24. *#94870345123456789# Deactivate the PWM-Mem
25. **21*number# Turn on “All Calls” diverting to the phone number
entered
26. **61*number# Turn on “No Reply” diverting to the phone number
entered
27. **67*number# Turn on “On Busy” diverting to the phone number
entered
Each command is prefixed with either one or two * or # characters as
follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button
Once each command has been entered, if it is a network command (as
opposed to a local handset command) it must be transmitted to the
network by pressing the YES (receiver) key which acts as an enter key –
this is represented here with the © character. Always enter numbers in
full international format +CountryAreaNumber ( e.g. +447712345678).
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times)
**05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times)
**052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable,
busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate **67*number#©
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before
diverting a call (such as on no answer). Seconds must be a value from 5
to 30. De-registering the same divert will also delete this change!
**service*number**seconds#© (Service numbers, see below)
Call barring
Activate barring all outgoing calls (see Security to set code)
**33*code#©
Deactivate barring all outgoing calls #33*code#©
Check status of barring all outgoing calls *#33#©
Activate barring all calls **330*code#©
Deactivate barring all calls #330*code#©
Check status of barring all calls *#330*code#©
Activate barring all outgoing international calls **331*code#©
Deactivate barring all outgoing international calls #331*code#©
Check status of barring all outgoing international calls *#331#©
Activate barring all outgoing international calls except to home country
**332*code#©
Deactivate barring all outgoing international calls except to home
country #332*code#©
Check status of barring all outgoing international calls except to home
country *#332#©
Activate barring all outgoing calls **333*code#©
Deactivate barring all outgoing calls #333*code#©
Check status of barring all outgoing calls *#333#©
Activate barring all incoming calls **35*code#©
Deactivate barring all incoming calls #35*code#©
Check status of barring all incoming calls *#35#©
Activate barring all incoming calls when roaming **351*code#©
Deactivate barring all incoming calls when roaming #351*code#©
Check status of barring all incoming calls when roaming *#351#©
Activate barring all incoming calls **353*code#©
Deactivate barring all incoming calls #353*code#©
Check status of barring all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service
provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one’s own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was
diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party
(if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©
How to delete Flashvortex.com Ad from Banner
Hi friends, Today i am discuss about how to remove Flashvortex.com
advertise from your banner . Flashvortex is a online flash banner
generating site.using this we can generate your own banner easy and
simple without any knowledge in flash. But major disadvantage of free
user is show a water mark ads in bottom right corner .This ads remove
only after purchase a premium membership .
****
Just follow below steps to easy to remove ads ...!!
Step 1:
First step you need to download SWiX flash editor software...
SWix is a free version software used to edit .swf files
*****
Dowload SWIX Sofware Free
Step 2:
Go to flashvortex.com .
Create any banner from the List ...
*************
After Generating your banner Click Download Animation button in
advanced installation section.
step3:
Open SWIX flash editor software ..
Open your swf file with SWiX (flashvortex .swf file).
Go to View option in top bar and Select on Movie XML option. (ref
fig)
Press CTRL+F (find) to find ShapeId
After Remove this Code Look Like This
Airtel Gprs Tricks
Optimizing Internet Connection Using Internet Cyclone - Increase Internet Speed in Windows
1. First You Need Create New Setting In Your Mobile Phone
Apn - airtelgprs.com
Proxy Address - 141.000.011.253
Port - 80
2. Now You Open Operamini Handler And Use Following Given Below Settings
Proxy Type - Http
Proxy - mocricket.com Or fb.me
That's it Now You Are Done .
This Trick Are Already tested and working fine in rajasthan . Please Let's Check in your State Also
Ajmal Kasab hanged
Ajmal Kasab, the lone Pakistani gunman caught alive after the Mumbai
terror attack, was hanged to death at the Yerawada central prison in
Pune in a top-secret operation this morning, less than a week before the
fourth anniversary of the carnage.
25-year-old Kasab was hanged at 7.30 am, Maharashtra Home Minister R R
Patil said in Mumbai shortly after the hanging.
Pakistan government was kept informed about the execution. Maharashtra Chief Minister Prithviraj Chavan said Kasab was buried inside the Yerawada jail premises. Kasab did not have any last wish or a will, Mr Chavan told reporters in Mumbai. The execution in the Mumbai attack trial brought relief to many people affected by the audacious strike by 10 terrorists of Pakistan-based terror outfit Lashkar-e-Taiba (LeT) in which 166 people were killed. Nine LeT men were killed during the 60-hour siege which began on the night of November 26, 2008. Kasab was executed after he exhausted all legal remedies available to escape the noose with President Pranab Mukherjee rejecting his mercy plea on November 5. Kasab, who has been lodged at the Arthur Road prison in central Mumbai ever since his arrest soon after the terror attack, was whisked out of his heavily-guarded cell in the intervening night of November 18 and 19, a senior police official said. The team, along with Kasab, reached Pune’s Yerawada jail in the wee hours of November 19. “The President rejected the mercy petition on November 5. I signed it on November 7 and on November 8, the Maharashtra government had been communicated to take action. It was decided that he would be executed on November 21 at 7.30 AM. and accordingly the whole process has been completed today,” Union Home Minister Sushil Kumar Shinde said, adding secrecy about the hanging was a key. Letter faxed to Pakistan While stating that Pakistan was informed about the execution of Ajmal Kasab, the Home Minister said, with this (execution) the judicial procedure of 26/11 case has been completed. "Indian mission in Islamabad informed the Pakistan government about Kasab’s hanging through letter. Since Pakistan refused to take the letter, same was sent through fax", Mr. Shinde said. Pakistan denies charge However, Pakistan rejected India''s asseration and claimed that the note regarding Ajmal Kasab’s execution was “received” and “acknowledged”.
Pakistan government was kept informed about the execution. Maharashtra Chief Minister Prithviraj Chavan said Kasab was buried inside the Yerawada jail premises. Kasab did not have any last wish or a will, Mr Chavan told reporters in Mumbai. The execution in the Mumbai attack trial brought relief to many people affected by the audacious strike by 10 terrorists of Pakistan-based terror outfit Lashkar-e-Taiba (LeT) in which 166 people were killed. Nine LeT men were killed during the 60-hour siege which began on the night of November 26, 2008. Kasab was executed after he exhausted all legal remedies available to escape the noose with President Pranab Mukherjee rejecting his mercy plea on November 5. Kasab, who has been lodged at the Arthur Road prison in central Mumbai ever since his arrest soon after the terror attack, was whisked out of his heavily-guarded cell in the intervening night of November 18 and 19, a senior police official said. The team, along with Kasab, reached Pune’s Yerawada jail in the wee hours of November 19. “The President rejected the mercy petition on November 5. I signed it on November 7 and on November 8, the Maharashtra government had been communicated to take action. It was decided that he would be executed on November 21 at 7.30 AM. and accordingly the whole process has been completed today,” Union Home Minister Sushil Kumar Shinde said, adding secrecy about the hanging was a key. Letter faxed to Pakistan While stating that Pakistan was informed about the execution of Ajmal Kasab, the Home Minister said, with this (execution) the judicial procedure of 26/11 case has been completed. "Indian mission in Islamabad informed the Pakistan government about Kasab’s hanging through letter. Since Pakistan refused to take the letter, same was sent through fax", Mr. Shinde said. Pakistan denies charge However, Pakistan rejected India''s asseration and claimed that the note regarding Ajmal Kasab’s execution was “received” and “acknowledged”.
Free latest new docomo gprs trick november 2012 with proxy
# Instruction
Step 1 : Make setting as per below
APN: TATA.DOCOMO.INTERNET
Proxy: 220.226.181.88
Port: 8080
Homepage: http://www.google.com
GSAT 10 STARTED TEST ON KU BAND
The newly launched indian satellite Gsat 1o has startted testing it's ku
band transmission.They are testing 10 tp's now.This is really a good
news to all.soon they will commence C band transmission also.More
channels are coming up on this satellite.The transponder details of this
ku band test are as follows.the ku band test is carried out in
Horizontal TP's.
11902 H 30000
11942 H 30000
11982 H 30000
12022 H 30000
12322 H 30000
12362 H 30000
12402 H 30000
12442 H 30000
12482 H
30000
12523 H 30000
india is great AMAZING Facts in india
Subscribe to:
Posts (Atom)

